Feature:

• Magnetic drive,lower transmission resistance
• Magnetic shield,for external magnetic field protection
• Sealed dry dial register ensures clear reading
• Internal strainer,inlet strainer for selecting
• External regulating device
• Standards Compliance
• ISO 4064 & AWWA C708
• Non return valve
• Cubic Meters, U.S. gallon (USG) Cubic Feet (CF) for selecting
• Reed switch option

Working Conditions

• Ware temperature:≤50℃ For Cold Type
• Ware temperature:≤90℃ For Hot Type
• Water pressure:≤1.6MPa

ISO4064 Standard:

Maximum Error

• In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
• In the upper zone from Qt inclusive up to and including Qmax is ±2%.

AWWA C708 Standard:

Maximum Error

• In the lower zone from Qmin inclusive up to but excluding Qt is ±3%.
• In the upper zone from Qt inclusive up to and including Qmax is ±1.5%.

Installation Requirements

• The meter should be installed in horizontal position with the direction of the flow as indicated by the arrow cast in the meter body with the register face upwards
• Pipeline must be flushed before installation
• The meter should be constantly full of water during operation